Them Navigate the Complicated Process of Obtaining Oversize and Overweight Permits in Oklahoma

June 14, 2024

Whether you are a trucking firm or a driver operating in Oklahoma, it is important to ensure that you are in compliance with the requirements governing Oklahoma oversize permits. For the purpose of avoiding expensive penalties and delays, it is necessary to get the appropriate permits in order to transport cargo that exceed the authorized dimensions or weight restrictions. We at IRP Trucks, a leading trucking permit firm, are familiar with the complexities involved in acquiring permits from the Oklahoma Department of Transportation (DOT), and we are here to assist you in navigating the process.

Comprehending the Operating and Warehouse Permit Requirements in Oklahoma

There are particular restrictions in place in Oklahoma that control the movement of cars that are overweight or oversize on the state’s highways. All drivers are protected by these rules, which are in place to safeguard the state’s infrastructure and assure the safety of all motorists. Some important things to keep in mind are as follows:

Dimensions and weight restrictions imposed by the law

– Length: 59’6″ semitrailer and load on the U.S. Defense Highway System (including Interstate routes), 53′ on other routes

– Width: 8’6″ (8′ on highways with a surface width less than 20 feet)

– Height: 13’6″

– Weight: 80,000 lbs. gross on Interstate, 90,000 lbs. on non-Interstate routes (with legal tandem and tridem weights)

Limitations on Routine Permits

– Length: No set maximum

– Width: 16′

– Height: Depends on routes

– Weight: Single axle – 20,000 lbs., Tandem axle – 40,000 lbs. (with at least 4’3″ axle spacing) or 39,000 lbs. (less than 4’3″ spacing), Tridem axle – 60,000 lbs. (57,000 lbs. with 4’2″ axle spacings), Quad axle – 65,000 lbs., Steer axle – 15,000 lbs. (with minimum 15′ spacing from first drive axle)

Validity of Permits and Restrictions on Their Use

You are need to get a permission in order to enter the state, and permits are now valid for a period of three days.
All seven days of the week, from half an hour before dawn to half an hour after sunset, the business is open for business. Continuous travel is an option for loads that are only overweight if the request is made while the permit is being ordered.
The transportation of oversized cargoes is prohibited on the Interstate system through Cleveland, Oklahoma, and Tulsa counties between the hours of 7:00 a.m. and 9:00 a.m. and 3:30 p.m. and 6:30 p.m., Monday through Friday (this restriction does not apply to loads that are just overweight). During significant holidays, travel without a permit is not permitted.

The Turnpikes of Oklahoma;

Without a Pike Pass, loads that are up to 9 feet 6 inches broad are allowed to ride.
In order to get a permit, loads that are above 9 feet 6 inches wide and up to 11 feet 6 inches wide (and up to 13 feet 6 inches wide on the Cherokee Turnpike alone) need a Pike Pass reference number.
-! There is a limit of 108,000 pounds that may be placed on the turnpikes. The weight is paid for on the state permit, and the turnpike does not impose any more fees in addition to the standard price placed on each axle.

Requirements for an Escort

Length: above 80 feet on two-lane roads, one escort is required; above 100 feet on two-lane highways, two escorts are required
Over 12 feet on all roads requires one escort, over 14 feet on two-lane highways with two escorts, and over 16 feet on multi-lane highways with two escorts.
Two escorts are required on all routes, and the permittee is required to make prior contact with public utilities and railroads along the route. The height requirement is above 15 feet 8 inches.

Additional Requirements

– Signs and flags indicating that the load is large are necessary for oversized loads.
In the state of Oklahoma, farm machinery is no longer exempt from the need that licenses be obtained.
-! Dozers that have blades that are wider than 12 feet from the base of operation are not allowed to go more than 50 miles from the base of operation unless the blade is removed.
-! To be eligible for an overweight permit in Oklahoma, your registration must be prorated for a weight of ninety thousand pounds, or for at least the amount of gross weight that you need to be authorized if your weight is less than ninety thousand pounds.
-! When applying for an overweight permit, it is necessary to attach either a scale weight ticket that has been accepted or a certification of gross weight from the freight carrier.

IRP Trucks are helping to streamline the process of obtaining permits.

At IRP Trucks, we are aware of the obstacles that must be overcome in order to get oversize/overweight licenses in Oklahoma as well as other Department of Transportation permits around the United States. Our group of knowledgeable professionals is well-versed in both state and federal legislation, which guarantees that you will get the appropriate permissions for your route.

We provide a permit procurement procedure that is hassle-free, covering everything from checking the specifics of your cargo to liaising with the relevant authorities. You may receive permits in a short amount of time, whether you need them in a matter of minutes or days, thanks to our availability around the clock and our speedy response times.

We are committed to provide you with the most streamlined and effective freight transportation experience possible by offering affordable pricing, a variety of flexible payment methods, and attentive customer care. You can rely on our experience to ensure that your trucks continue to move with efficiency and compliance across Oklahoma and beyond.

Get in touch with IRP Trucks right now to get further information on our Oklahoma oversize/overweight permit services and to find out how we can help you navigate the permitting procedure in a flawless manner.

 

Article Categories:
Other

Leave a Reply

Your email address will not be published. Required fields are marked *